 |
| Items in cart: 0 |
| Total amount: $0.00 |
  |
 |
 |
 |
 |
|
|
|
|
 |
  |
  |
 |
  |
 |
|
|
 |
FIRE SEAL 2000 |
|
For years we've
been working on a product to repair cracks, pits or holes in exhaust manifolds,
tailpipes, mufflers, or other components subjected to high temperatures while in
use. Because replacement parts are often difficult or impossible to find, there
is a real need for this type of product in the marketplace. FIRE SEAL 2000™
is a single-component (no mixing required) ceramic and stainless steel-filled
putty that is resistant to fuels, oils, and corrosives. After it is fully cured,
it will withstand temperatures up to 2000° F. FIRE SEAL 2000™ may be
applied to rough-surfaced or sandblasted steel, stainless steel, or cast iron.
Instructions: Use a putty knife, small trowel or
spatula to apply. Curing: Let FIRE SEAL 2000™ dry for 16-24 hours. Begin
final cure by idling engine for 10-15 minutes at a time. You may sand FIRE
SEAL 2000™ after it is fully cured, using a file or medium grit sandpaper.
Do not use any lubricants for machining, but always use a dust mask to avoid
inhaling the sanding dust.
Tube with
2 one-ounce packets..........$16.50
|
Bookmark This Page
Refer this page to a friend
|
|
|
|
