 |
| Items in cart: 0 |
| Total amount: $0.00 |
  |
 |
 |
 |
 |
|
|
|
|
 |
  |
  |
 |
  |
 |
Go Daddy |
|
 |
| Quick Index - Full Product
List |
Cleaners &
Degreasers
|
 |
MARINE-CLEAN
cleans and degreases in one application without
leaving residues, noxious fumes or flammable
solvents. No other cleaner works as fast or as
well. It makes petroleum-based cleaners almost
obsolete because MARINE-CLEAN
can be diluted with water up to 3, 4, 5 and even
10 times its volume while remaining more potent
than other cleaners.
|
|
 |
PREP
& READY
provides the best adhesion for
POR-15® on any surface,
including aluminum and shiny polished metal
surfaces. Our simple process gently etches
metal, creating an ideal anchor pattern for
coatings such as POR-15®, while
simultaneously leaving a zinc phosphate coating
to insure chemical bonding of paint and
steel.
|
|
 |
Designed exclusively for
use with our great GLISTEN PC
clearcoat, AP-120 prep
guarantees perfect adhesion of GLISTEN
PC to any metal surface, especially
chrome or polished aluminum, where good adhesion
is often difficult to achieve.
AP-120 is non-flammable with no
noxious fumes. Wear rubber or latex gloves when
using.
|
|
 |
POR-15® SOLVENT
is specially formulated for easy
cleanup or thinning of POR-15®
Rust Preventive Paint.
|
|
 |
POR-STRIP
® Paint Remover/Stripper is a clear
spray-on remover with the consistency of water.
In sample testing, our POR-STRIP
® was the choice of professional auto
strippers. A special chemical-resistant spray
bottle allows you to use less and finish faster
than brushing.
|
POR-15 Rust
Preventive Paint
|
 |
POR-15®
is a high-tech, high performance rust-preventive
coating designed for application directly on
rusted or seasoned metal surfaces. It dries to
an incredible rock-hard, non-porous finish that
won't chip, crack, or peel, and it prevents rust
from recurring by protecting metal from further
exposure to moisture.
|
|
 |
Get maximum convenience
and efficiency with a POR-15® SIX
PACK. This package contains six 4
oz.cans, so you'll only open small amounts of
POR-15® as you need them, with NO WASTE! Each
can covers 12 square feet, and your
SIX-PACK can be ordered split
between Gloss Black, Semi Gloss Black, Silver,
Gray and Clear colors, if you wish. Order your
SIX-PACK today!
|
|
 |
We created the
SUPER STARTER KIT in response
to requests from customers anxious to try out
the entire 3-step rust-stopping system, as well
as those customers who need to cut oily residue
on the metal they plan to paint.
|
|
 |
You've loved the
SIX PACK, Now meet the
MIX PACK! The popularity
of our SIX PACK has
prompted us to introduce our new MIX
PACK. Now get three 4 oz. cans of
POR-15® (Gloss Black Only) with
three 4 oz.cans of either
BLACKCOTE or CHASSIS
COAT BLACK.
|
|
 |
For years our customers
have asked us for a thicker version of our
world-famous POR-15® for
filling seams or holes. Here it is! POR
PATCH is, quite literally,
POR-15® in a tube, and like
POR-15® it dries as hard as a
rock, remains flexible, and once dry is totally
impervious to fuels and solvents. Try it
yourself, it's incredible!
|
Floor Armor Concrete Coating
|
 |
Now, seal your floor permanently, with all-new
Floor Armor
floor painting kits, from the makers of
POR-15. No need for acids; no need to
flood your floor with water. Just use our easy
degreaser on any heavy oil or grease stains,
vacuum away any dust or dirt, and paint right
over everything with Floor Armor.
|
|
 |
Our Deluxe Floor Armor Kit includes
everything our Basic Kit has plus a Clearcoat
Topcoat and Decorative color chips available in
three colors.
|
|
 |
This great Clear Coat Kit contains
everything you need to clearcoat your garage or
basement floor, including the decorative vinyl
chips that hide imperfections in the concrete
and add beauty to any floor with our
simple-to-follow instructions.
|
|
 |
Floor Armor Concrete Patching/Repair Kit
is an advanced self-leveling patching compound
engineered to repair and fill concrete surfaces
that will be coated with POR-15 Floor Armor
|
|
 |
Our solid Vinyl Chips will remain flat and range
in thickness from 4 to 6 mils. Colorfast and
resist ultraviolet degradation.
|
|
 |
Floor Armor is highly resistant to
chemicals, abrasion, heat, and impact.
|
|
 |
This rock-hard
Clear Coat finish has the same
excellent resistance to chemicals, abrasion,
heat, and impact that our Floor Armor Coating
has.
|
|
 |
Grease and Oil Remover neutralizes grease & oil stains and lets Floor
Armor penetrate and lock into microcellular
structure of cured or aged concrete with Polydigital penetrating action. |
|
 |
Non Slip Aggregate provides a small separation between your shoe
and the floor on a wet surface permitting water
to escape and preventing hydroplaning (or
slipping).
|
|
Primers
|
|
 |
TIE-COAT
PRIMER- High Build Primer formulated to
be the perfect intercoat for jobs requiring a
primer with fill / build
properties. Whether coating over POR-15
Rust Preventive Paint, or any other coating,
TIE-COAT PRIMER will get the
job done right!
|
|
 |
SELF-ETCH PRIMER
is NOT a high-build primer, like
POR-15's TIECOAT PRIMER, but it can be sprayed
or brushed on almost any painted surface and can
be topcoated in 15 - 30 minutes. It bonds
incredibly well to POR-15 Rust Preventive Paint,
and all topcoats bond incredibly well to POR-15
Self-Etching Primer. It can be sanded lightly,
and, if desired, multiple coats may be
applied.
|
Single Part
Topcoats
|
 |
BLACKCOTE
is a permanent black coating developed for
application over painted and unpainted surfaces.
Apply over POR-15 Rust Preventive
Paint for the toughest, most permanent
protection against rust and corrosion ever
developed.
|
|
 |
CHASSISCOAT BLACK is a permanent black coating
developed for application over painted and
unpainted surfaces. Apply over POR-15
Rust Preventive Paint for the toughest,
most permanent protection against rust and
corrosion ever developed
|
|
 |
STIRLING
SILVER is a permanent silver coating
developed for application over painted and
unpainted surfaces. Apply over POR-15
Rust Preventive Paint for the toughest,
most permanent protection against rust and
corrosion ever developed.
|
|
 |
METAL
MASK is extremely tough, very chip
and scratch resistant, and amazingly close to
the color of brand-new cast iron or bare
steel.
|
|
 |
FLEXCOTE is a premium-quality
state-of-the art polyurethane finish designed
for above-the-waterline topsides and decks.We
guarantee you'll find it's the best product of
its kind available anywhere with the best hiding
power in the industry! One coat, when used with
our marine primers, is guaranteed to give you
100% hiding power.
|
|
|
You've loved the
SIX PACK, Now meet the
MIX PACK! The popularity
of our SIX PACK has
prompted us to introduce our new MIX
PACK. Now get three 4 oz. cans of
POR-15® (Gloss Black Only) with
three 4 oz.cans of either
BLACKCOTE or CHASSIS
COAT
BLACK.
|
2
Part
Topcoats
 |
HARDNOSE
paints are tough, glossy, two-component
coatings for use over primed or painted
surfaces. They are moisture cured, so exposure
to moisture and humidity will actually improve
their performance and strength.
|
|
 |
WHITECOTE
cures to a rock-hard, non-porous finish that
won't chip, crack, or peel when applied as
directed. It's perfect for wrought iron patio
furniture, plumbing fixtures, etc., because it's
super-tough, not UV-sensitive, and brilliantly
white.
|
Clearcoats
|
 |
PELUCID
is one of the most advanced single component
clear coats in the world. It's super clear,
super glossy, and unbelievably tough! Spray or
brush this non-yellowing single-component clear
coat over painted or unpainted fiberglass, wood,
and other interior surfaces that need a clear
lustrous finish.
|
|
 |
GLISTEN
PC is a High Gloss, Rock Hard,
Water-clear topcoat designed for spray or brush
application over all metal surfaces, including
highly polished aluminum and chrome surfaces.
GLISTEN PC will not leave
brushmarks, and will dry in less than one hour,
but will take 3-4 days to reach maximum
hardness.
|
High Temperature
Paints
|
 |
BLACK
VELVET is the only black paint capable
of withstanding extreme temperatures up to 1200°
F. This high temp paint will maintain a rich
black color and won't burn off. Can be used on
all cars, domestic or foreign, and it meets or
exceeds properties and requirements of
MIL-C-13370. Can be brushed or
sprayed.
|
|
 |
FACTORY MANIFOLD
GRAY is a high temp gray paint capable
of withstanding extreme temperatures up to 1400°
F. This high temp paint will maintain a durable
iron gray color and won't burn off. Can be used
on all cars, domestic or foreign, and it meets
or exceeds properties and requirements of
MIL-C-13370.
|
|
 |
POR-20®
is a high temperature Aluminum paint is
capable of withstanding temperatures up to 1400°
F, POR-20® is also extremely weather, salt and
moisture resistant. Helps prevent cracking,
chipping, and peeling.You will be excited by its
performance and beauty. We guarantee this to be
the most brilliant, uniform heat resistant
coating available anywhere. It can be brushed or
sprayed.
|
Engine
Enamel
|
 |
Extra-pigment
ENGINE ENAMELS have been
formulated to be the best and most
beautiful engine enamels you can buy. Enamels
are available in incredibly rich colors that
flow easily, cover better than any other paint,
and last longer. Our enamels are non-flammable
and conform to even the strictest California
environmental standards. We invite you to
compare them with any other product and you'll
see what we mean.
|
Putty,
Fillers & Sealers
|
 |
STRAIGHTLINE
BODY FILLER has over 30% more resin
than other fillers, which gives it much greater
adhesion. This makes it the perfect choice to
apply over POR-15.
STRAIGHTLINE has ultra fine
particles for perfect feathering of edges, and
is manufactured under vacuum, which eliminates
those pesky air holes you've experienced with
other fillers.
|
|
 |
RESTOGRIP
Body Filler is specifically designed for
applications that require more strength, such as
bridging holes, or filling high-stress areas.
RESTOGRIP Body Filler is
loaded with tiny polyester fibers, which makes
it many times stronger than ordinary body
fillers.
|
|
 |
'Unbelievable', that's
what restorers say when they see a demonstration
of this incredible EPOXY PUTTY
product. It's so strong you can drill and tap
it, yet gentle enough that you can apply it with
your bare fingers.
|
|
 |
FIRE SEAL 2000 is a single-component (no mixing
required) ceramic and stainless steel-filled
putty that is resistant to fuels, oils, and
corrosives. After it is fully cured, it will
withstand temperatures up to 2000° F.
FIRE SEAL 2000T may be applied
to rough-surfaced or sandblasted steel,
stainless steel, or cast
iron.
|
|
|
POR PATCH is, quite literally,
POR-15® in a tube, and like
POR-15® it dries as hard as a
rock, remains flexible, and once dry is totally
impervious to fuels and solvents. It's so tough
it actually adds strength to weakened metal. And
it won't absorb moisture and swell like
conventional body
fillers.
|
Fuel
Tank Restoration
|
 |
U.S. STANDARD
FUEL TANK SEALER was formulated and
developed in our own laboratories due to the
demand for a high-tech sealer impervious to all
fuels, including the new Stage II fuels which
have a high alcohol content. It has superior
strength and fuel resistance, and does
not contain Methyl Ethyl Ketone, a
highly flammable and deadly carcinogen
(cancer-causing).
|
|
 |
When fuel sits for days
or weeks at a time it breaks down chemically.
Bad fuel can cause problems in your fuel system.
When you pour FUEL PRESERVATIVE &
STABILIZER in your tank, oxygen is
chemically isolated (preventing oxidation) and
corrosive compounds are neutralized (stopping
rust formation).
|
Complete
Kits
|
 |
Our POR-15 Caliper Painting Kit will
dress up your steel or aluminum calipers with a
super-tough durable finish that will make your
car or truck look terrific.
Our caliper paint is beautiful in appearance,
and strong enough to withstand the punishment of
road debris and temperature extremes. And it
looks terrific on any car or truck.
|
|
|
We created the
SUPER STARTER KIT in response
to requests from customers anxious to try out
the entire 3-step rust-stopping system, as well
as those customers who need to cut oily residue
on the metal they plan to paint.
|
|
 |
UTILITY &
CYCLE FUEL TANK REPAIR KITS have been
designed for the special needs of bikes and
other small fuel tanks such as recreational
vehicles, snowmobiles, outboards, generators,
etc.
|
|
 |
For those unfortunate
customers who have had bad results from other
inferior fuel tank sealers, we have developed
these all new "HEAVY DUTY UTILITY &
CYCLE TANK REPAIR KITS." They feature
everything found in our regular UTILITY
& CYCLE TANK REPAIR KIT, PLUS a
quart bottle of our famous Tank Strip to first
remove that inferior coating that failed you.
|
|
 |
FUEL TANK
REPAIR is more than just pouring in a
quart of sealer and sloshing it around. If gum,
varnish, sludge, or fuel are inside, they must
be removed first. Our U.S. STANDARD TANK
SEALER, like all other sealers, will
not work in a contaminated tank. Find out what
the pros already know... our FUEL TANK
REPAIR KIT has everything you need to
do the job right!
|
|
 |
Our ENGINE
PAINTING KIT has everything you
need to do a superior job, and includes the
step-by-step instructions needed to make sure
you do it right, especially if you're a
beginner.
|
|
 |
Our FLOORPAN
& TRUNK RESTORATION KIT
will you save hundreds of dollars over
replacement... and your restoration will be
better than replacement because you'll never see
rust again, whether it's a daily driver or a
show car. You can maintain the integrity of the
structure with no ugly welded seams. Our easy
step-by-step instructions make it simple to
restore floor pans, trunk pans, pickup truck
beds, etc. You'll be amazed how complete it
is... Everything you need is at your
fingertips.
|
|
 |
Our MANIFOLD
RESTORATION KIT will restore your
rusted, pitted, or cracked manifold back to
first-rate condition and make it look great as
well. Sandblasting must be done first; then all
cracks and imperfections can be easily filled in
and repaired with our incredible
FireSeal 2000T putty/filler.
After sanding, coat manifold with the
heat-resistant paint of your
choice.
|
|
 |
The POR-15®
STEERING WHEEL REPAIR KIT will enable
anyone to restore a steering wheel to
show-quality condition. Our step-by-step
instructions were written by leading experts in
steering wheel repair. You will find the
techniques you learn here useful in restoring
other hard-to-repair items as well. Restore dash
knobs, gear shift knobs, radio buttons, and
other hard rubber, bakelite, or other plastic
interior parts.
|
|
 |
You can restore your
banged-up, scratched, and weathered aluminum
wheels to like-new condition with our terrific
WHEEL RESTORATION and POLISHING
KIT. All you need is your trusty
electric drill, and our complete instructions
and superior products will guide you through the
process.
|
Accessories
& Specialty
|
 |
ARTISAN
METAL POLISH is specially
formulated for professionals and others that
want a fast-acting yet gentle polish. Use it to
quickly put a fabulous shine on chrome,
aluminum, brass, steel, stainless, silver or any
other bright metal surface. Try it on your car,
truck, motorcycle, boat, brass lamps,
silverware, aluminum or chrome wheels, and
hundreds of other uses.
|
|
 |
Find out why
our BOSS GLOSS Vinyl and
Trim Protectant is so much better than those
popular national brands! We've used the big
brand of vinyl and rubber protectant for years
on our own cars, and we've always been
disappointed at how quickly it fades away. So...
we approached our chemists with the challenge of
making something better.
|
|
 |
This is not just a
temporary top dressing like the well-known
product that detailers use to make rubber and
vinyl shine for a couple of days.
POR-GLO is a brilliant clear
coating that lasts up to one year!
-
Directions
-
Information Sheet
|
|
 |
Our
SUPERTACK dry wiping cloths are
terrific for paint jobs, in your car, at your
computer, or your electronic gear. An excellent
dry tack cloth for use before painting. Picks up
dust and lint to ensure a perfect
job!
|
|
 |
POWERMESH
REINFORCING FABRIC is
a special fiberglass reinforcing fabric
that can be used with POR-15
Rust Preventive paint to bridge gaps and repair
holes in sheet metal.
|
|
 |
Use our DRY AIR
SPRAY GUN FILTER to prevent downstream
moisture that will ruin your spray job. Avoid
failure with our direct in-line filter at the
gun. Experienced users know that moisture cannot
be present when applying
POR-15®... and even though your
spraying system may have moisture traps and
filters, condensation may occur in the hose
downstream and ruin your paint job.
|
|
 |
Flexible PAINT
SPOUTS eliminate messy drips and keep
grooves clean for resealing cans. Order enough
for all your paint cans.
|
|
 |
PAINT
BRUSHES available in 1/2", 1", 1 1/2",
& 2" sizes. |
|
 |
Our LATEX
GLOVES are thin, close-fitting, and
have the dexterity and protection of fine
surgical gloves. They are regular cuff length
with very high tactile sensitivity and will fit
either hand. We've used these latex gloves in
our laboratory for years and found them to be
excellent for even the most sensitive jobs.
Large size fits medium, small, as
well.
|
|
 |
Try a DAUBER
KIT to apply POR-15 to the inside of
swing sets, motorcycle frames, farm equipment,
or anywhere you can't reach with a regular
brush!
|
|
 |
Our wax is made of the
highest grade, pure Brazilian Carnauba, then
pre-softened for ease of application. The
fabulous shine, rock-hard protection, and the
longevity of the finish are unparalleled. No
fillers or cleaners are used in the formula. For
the best shine protection, and ease of
application, there is only one choice...our
BRAZILIAN CARNAUBA
WAX.
|
|
|
POR-15® SOLVENT
is
specially formulated for thinning POR-15®
High Temperature Industrial Maintaince Coatings.
|
|
|
POR-STRIP
® Paint Remover/Stripper is a clear
spray-on remover with the consistency of water.
In sample testing, our POR-STRIP
® was the choice of professional auto
strippers. A special chemical-resistant spray
bottle allows you to use less and finish faster
than brushing. Remove any coating from any
surface without damaging window glass, chrome,
or weatherstrip. POR-STRIP ® is
non acidic and will not harm aluminum or factory
fiberglass.
|
Specials
|
 |
Choose Any
4 Quarts of POR-15
POR-15 SPECIAL = $157.50 |
|
 |
Quart of our U.S.
Standard Fuel Tank Sealer
Quart of Prep
& Ready
FUEL TANK
SEALER SPECIAL =
$46.50 |
|
 |
POR-15
& BLACKCOTE
PINTS -
$50.50
QUARTS - $80.75
GALLONS -
$285.50 |
|
 |
POR-15 & CHASSIS COAT
BLACK
PINTS - $50.50
QUARTS -
$80.75
GALLONS - $285.50 |
|
 |
POR-15 & STIRLING SILVER
PINTS - $50.50
QUARTS -
$80.75
GALLONS -
$285.50 | | | | | |
|
|
