Quantcast
Follow Us:
My Account:  Log In Log Out
view cart
0 item(s) in cart/ total: $0  
Rust Preventive Coating
Rust Remover
Matte Clear Coat
Preparation Products
Bed Liner
Paint Remover
Concrete Floor Coatings
Primers
Single Part Topcoats
2 Part Topcoats
Engine Enamel
High Temperature Paints
Putty, Fillers & Undercoating
Complete Kits
Fuel Tank Restoration
Accessories & Specialty
Shirts









3-Step Stop Rust System QT

3-Step Stop Rust System QT

Item Id: PB-3SS-QT
Review this item Review this item
Price:
$0.00
Availability:
In Stock
Choose Options for Pricing
Color of Coating help
Gloss Black
Semi-Gloss Black
Silver
Gray
Clear
Quantity
Description

The ultimate rust preventive system for permanent corrosion protection. Shields metal in just 3 easy steps, clean it, prep it, and coat it.

The POR-15 3-Step Stop Rust System is designed to stop rust on metal surfaces and ensures the best results when applying POR-15 Rust Preventive Coating. The clear-cut process allows for the proper cleaning, prepping, and coating of metal to create a non-porous surface that seals and protects metal from water, chemicals, and salt, and other corrosive contaminants.

The components of the 3-Step System

Step 1 Image

Step 1: POR-15 Cleaner Degreaser (Formerly Marine Clean) removes grease, oil, dirt and grime in one application without leaving residues, noxious fumes or flammable solvents.

Step 2 Image

Step 2: POR-15 Metal Prep (Formerly Prep & Ready) provides the best adhesion for POR-15 Rust Preventive Coating on any metal surface, including shiny polished metal surfaces.

Step 3 Image

Step 3: POR-15 Rust Preventive Coating is a high-tech, high performance rust preventive coating designed for application directly on stable rust or seasoned metal surfaces. Provides permanent rust protection with a hammer-tough finish resistant to acids, alkalis, and repels all fuels and oils.

Step-by-step Restoration

Before Image of a Rusty truck bed

Before: Heavily rusted diamond-plate pickup truck beds can be a problem, fix them permanently with POR-15 3-Step System.

Step 1

Step 1: Clean it! Remove loose rust and degrease surface with water-based Cleaner Degreaser

 
Step 2

Step 2: Prep it! Neutralize rust and etch with Metal Prep.

 
Step 3

Step 3: Coat it! After thorough washing and drying, coat with POR-15 Rust Preventive Coating, right onto the rust!

 
Top Coat for UV protection

For areas exposed to U.V. light: Topcoat with Top Coat, 2K Urethane, or other top coat of your choice.

After

After: Now you have a PERMANENTLY repaired truck bed, that will NOT rust again.

Video
Feature 5 100
Instructions
Step 1. Apply our POR-15 Cleaner Degreaser to a surface, keep wet 10-15 minutes then rinse thoroughly with water and allow the surface to dry. For areas with noticeable build up use a stiff brush to break up material and continue to keep wet with POR-15 Cleaner Degreaser. It is important not to allow the product to dry on the surface prior to rinsing with water. POR-15 Cleaner Degreaser is a heavy duty water soluble cleaner that may be used over metal, wood, fiberglass, vinyl and concrete. 

Step 2. Apply POR-15 Metal Prep to the bare metal surface, keep wet 10-15 minutes then rinse thoroughly with water and allow the surface to dry. It is important not to allow POR-15® Metal Prep to dry on the surface prior to rinsing with water. Once dry the surface may show a flash rust or white powdery residue this is perfectly normal. POR-15 Metal Prep provides the best surface profile and greatly improves paint adhesion to any type of metal surface.

Step 3. Wearing gloves and a properly fitted respirator is recommended when applying POR-15 Rust Preventive Coating. It is recommended to apply two thin covering coats of POR-15 Rust Preventive Coating. Apply the first coat to the properly prepared substrate with the supplied brush. Apply the second coat when the first coat is almost dry, slightly tacky to the touch. If POR-15® Rust Preventive Coating is applied too heavy, brush marks may result in the finish. Do not apply this product if the humidity is above 70%. If the humidity is too high POR-15 Rust Preventive Coating will surface dry too quickly which may result in small bubbles in the finish. POR-15 Rust Preventive Coating requires a top coat only if exposed to direct sunlight. 

For topcoating use POR-15 Top Coat or POR-15 2K Urethane industrial topcoat. For best topcoating results, apply the top coat before POR-15 Rust Preventive coating dries. Topcoat should be applied while POR-15 Rust Preventive coating is still tacky. 

To topcoat cured POR-15 Rust Preventive Coating, lightly scuff surface with sandpaper or use POR-15 Self Etch Primer to create a bonding surface for topcoating.

Gloves, eye and skin protection, and an approved respirator should be worn whenever handling these products.
Warning

WARNING: Cancer - www.P65Warnings.ca.gov.