POR-15 Concrete Clear Coat is a gloss 2 component Urethane. It is designed to be applied over POR-15 Concrete Floor Armor aliphatic urethane floor coating resulting in an incredibly robust coating. This product provides excellent gloss and color retention when used on exterior surfaces exposed to sunlight and rain. The highly cross-linked formula provides superior abrasion, chemical, and solvent resistance for those high use interior surfaces. Due to these outstanding features, POR-15 Concrete Clear Coat is recommended as the final layer in a multi-layer system.
- POR-15 Concrete Floor Armor Technical Data Sheet
Dry time: 12 hours. RE-COAT TIME: 6 hours.
Pot Life: Approximately 2 hours.
Application: Mix contents of each component thoroughly with low speed power agitation prior to combining POR-15 Concrete Clear Coat Part A with POR-15 Part B Concrete Clear Coat aliphatic hardener activator. After each component is fully mixed, combine 3 parts by volume of POR-15 Concrete Clear Coat Part A with 1 part by volume of POR-15 Part B Concrete Clear Coat aliphatic hardener activator. Thoroughly agitate the mixture with power agitation for 5 minutes. Apply with natural bristle brush.
Clean-Up: Use xylene to clean application tools or non-cured drips and splatter. Keep container tightly closed when not in use. In case of fire, use CO2, dry chemical or foam to extinguish. For skin protection wear protective clothing impervious to ingredients listed. For eye protection wear safety glasses with side shields or splash-proof goggles. Transport and Store Upright Only and never in an area of sun or heat exposure. Before opening container, read all warning labels. Follow all precautions.
WARNING: Cancer - www.P65Warnings.ca.gov.