POR-15 Concrete Floor Armor is a gloss 2 component aliphatic urethane color coat. It is designed to be applied over POR-15 Concrete Primer Sealer resulting in an incredibly robust floor coating. This product provides excellent gloss and color retention when used on exterior surfaces exposed to sunlight and rain. POR-15 Concrete Clear Coat aliphatic urethane floor coating is recommended as the final layer, to be applied over POR-15 Concrete Floor Armor, in a multi-layer system. The highly cross-linked formula provides superior abrasion, chemical, and solvent resistance for those high use interior surfaces.
Coverage per Gallon: 220 - 320 Sq. Ft. (Coverage is affected by surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint.)
- POR-15 Concrete Floor Armor Technical Data Sheet
Dry time: 12 hours. RE-COAT TIME: 6 hours.
Pot life: Approximately 2 hours
Application: Mix contents of each component thoroughly with low speed power agitation prior to combining POR-15 Concrete Floor Armor Part A with Part B Concrete Floor Armor Hardener Activator. After each component is fully mixed, combine 3 parts by volume of POR-15 Concrete Floor Armor Part A with 1 part by volume of Part B Concrete Floor Armor Hardener Activator. Thoroughly agitate the mixture with power agitation for 5 minutes. Apply with natural bristle brush.
Clean-Up: Use xylene to clean application tools or non-cured drips and splatter. Keep container tightly closed when not in use. In case of fire, use CO2, dry chemical or foam to extinguish. For skin protection wear protective clothing impervious to ingredients listed. For eye protection wear safety glasses with side shields or splash-proof goggles. Transport and Store Upright Only and never in an area of sun or heat exposure. Before opening container, read all warning labels. Follow all precautions.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.