POR-15 Floor Pan & Trunk Restoration Kit
Floor Pan & Trunk Restoration Kit

Floor Pan & Trunk Restoration Kit

Repair Rusted Out Floors



item(s): 49519
Availability: In Stock
1 Review(s) Write a Review
Product Questions? Ask an Expert
Feature: * Not for sale in California
Feature 5 29
Optional quick payment method(s) below

POR-15 Floor Pan & Trunk Restoration Kit

You'll save hundreds of dollars over replacement... and your restoration will be better than replacement because you'll never see rust again, whether it's a daily driver or a show car. You can maintain the integrity of the structure with no ugly welded seams. Our easy step-by-step instructions make it simple to restore floor pans, trunk pans, pickup truck beds, etc. You'll be amazed how complete it is... Everything you need is at your fingertips. Order your kit today!

POR-15 Floor Pan and Trunk Restoration Kit has everything you need to repair and restore your floor pan or trunk bed.

Kit Contains:

  • One Quart POR-15 Cleaner Degreaser
  • One 8oz POR-15 Metal Prep
  • One 8oz POR-15 Solvent
  • One POR-15 Epoxy Putty
  • Four Brushes and Reinforcing Fabric
  • Safety Mask
  • Latex Gloves and Dispensing Scoop
  • Two Pints POR-15 Rust Preventive (Silver and Black)
  • One Pint POR-15 Top Coat (Chassis Black)

*Not for sale in the state of California.

Hot Rod Floor pan repair step 1
Floor pan holes were repaired with POR-15 Rust Preventive Coating, then the pits were filled POR-15 Epoxy Putty.
Hot Rod Floor pan repair step 2
The finish repair looks as good as new.
Hot Rod Floor pan repair step 3
The floorpan was topcoated with POR-15 Top Coat Chassis Black.
P.O.R. Products offers a floorpan and trunk restoration kit that allows you to repair rusted metal. The kit comes with all the simple hands tools and chemicals…to remove rust and neutralize, putty and paint your floorpan. – Hot Rod Magazine

How do you fill holes without welding?

Floor pan repair step 1
This floorboard has lots of rust-through, but it can be fixed.
Floor pan repair step 2
First, thoroughly clean with Cleaner Degreaser and rinse off.
Floor pan repair step 3
Next, prep the surface with Metal Prep, rinse off and let dry.
Floor pan repair step 4
Cut a section of Power Mesh Reinforcing Fabric to fit the area. Be sure to use gloves and goggles for this project!
Floor pan repair step 5
Coat the floorboard with POR-15 Rust Preventive Coating (Silver used here) and while wet, place the POR-15 Power Mesh Reinforcing Fabric onto it. Add a few coats of POR-15 Rust Preventive Coating on top, working it into the fabric.
Floor pan repair step 6
Once the coated POR-15 Power Mesh Reinforcing Fabric dries to rock-hard finish, it can then be coated with POR-15 Top Coat.

Browse Similar Items