POR-15 Power Mesh
Power Mesh

Power Mesh

Reinforcing Fabric



item(s): 49533
Availability: In Stock
1 Review(s) Write a Review
Product Questions? Ask an Expert
Feature: Size: 9 sq ft
Feature 5 100
Optional quick payment method(s) below

POR-15 Power Mesh Reinforcing Fabric

A special fiberglass reinforcing fabric that can be used with POR-15 Rust Preventive paint to bridge gaps and repair holes in sheet metal.

Handling Instructions: Do not handle fabric with bare hands.

Because it is a special type of fiberglass cloth, the fibers may pierce your skin and you will experience discomfort. Wear a pair of gloves (or other protection) whenever you handle this cloth. As you cut the cloth, some fibers may fly into the air, so be sure to wear the mask provided while cutting. Please note that there is one large piece of cloth in this envelope.

How do you fill holes without welding?

Floor pan repair step 1
This floorboard has lots of rust-through, but it can be fixed.
Floor pan repair step 2
First, thoroughly clean with Cleaner Degreaser and rinse off.
Floor pan repair step 3
Next, prep the surface with Metal Prep, rinse off and let dry.
Floor pan repair step 4
Cut a section of Power Mesh Reinforcing Fabric to fit the area. Be sure to use gloves and goggles for this project!
Floor pan repair step 5
Coat the floorboard with POR-15 Rust Preventive Coating (Silver used here) and while wet, place the POR-15 Power Mesh Reinforcing Fabric onto it. Add a few coats of POR-15 Rust Preventive Coating on top, working it into the fabric.
Floor pan repair step 6
Once the coated POR-15 Power Mesh Reinforcing Fabric dries to rock-hard finish, it can then be coated with POR-15 Top Coat.

Browse Similar Items